Skip til næste
Access Denied
IMPORTANT! If you’re a store owner, please make sure you have Customer accounts enabled in your Store Admin, as you have customer based locks set up with EasyLockdown app. Enable Customer Accounts
/
Beskrivelse
Ubiquiti Unifi UAP AC HD
Ønsker man at bestille 1 kasse, skal man bestille 20 stk af denne vare.
https://unifi-hd.ubnt.com/
UBNT-UAP-AC-HD
UBNT-UNIFI
802.11AC Wave 2 MU-MIMO (Multi-User, Multiple Input, Multiple Output) technology allows a Wave 2 AP to communicate with multiple clients at the same time - significantly increasing multi-user throughput and overall user experience.
MU-MIMO Assuming the same conditions, a Wave 2 AP provides up to 75% improvement* overall over a Wave 1 AP. This improvement increases wireless performance and/or serves more clients at the same performance level.
4x4 Spatial Streams At any single time, a Wave 2 AP can communicate with the following MU-MIMO clients:
four 1x1 clients
two 2x2 clients
one 2x2 client and two 1x1 clients
one 3x3 client and one 1x1 client
A 4x4 Wave 2 AP delivers up to 33% greater performance than a Wave 1 AP that is 3x3 in both radio bands.
Real-World Performance The UniFi AC HD AP is the first UniFi 802.11AC Wave 2 AP. Combining the performance increases from MU-MIMO technology and the use of 4x4 spatial streams, the UniFi AC HD AP delivers up to 225% greater performance* than a typical Wave 1 AP.
Technical specification
Dimensions 220 x 220 x 48.1 mm (8.66 x 8.66 x 1.89)
Weight 700 g (1.54 lb)
Weight With Mounting Kits 830 g (1.83 lb)
Networking Interface (2) 10/100/1000 Ethernet Ports (Can be Aggregated)
Port (1) USB 3C Port
Buttons Reset
Power Method Passive Power over Ethernet (48V), 802.3at Supported
(Supported Voltage Range: 44 to 57VDC)
Power Supply 48V, 0.5A PoE Gigabit Adapter
Power Save Supported
Maximum Power Consumption 17W
TX Power 2.4 GHz: 6-25 dBm
5 GHz: 6-25 dBm
Antennas 2.4 GHz: (2) Antennas, 3 dBi each
5 GHz: (2) Antennas, 4 dBi each
Wi-Fi Standards 802.11 a/b/g/n/ac/ac-wave2
Wireless Security WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
802.11w/PMF
BSSID Up to Four per Radio
Mounting Wall/Ceiling (Kits Included)
Operating Temperature -10 to 70° C (14 to 158° F)
Operating Humidity 5 to 95% Noncondensing
Certifications CE, FCC, IC
Advanced Traffic Management
VLAN 802.1Q
Advanced QoS Per-User Rate Limiting
Guest Traffic Isolation Supported
WMM Voice, Video, Best Effort, and Background
Concurrent Clients 500+
Supported Data Rates (Mbps)
802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n 6.5 Mbps to 450 Mbps (MCS0 - MCS23, HT 20/40)
802.11ac 6.5 Mbps to 1.7 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80/160)
802.11b 1, 2, 5.5, 11 Mbps
802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps
Ønsker man at bestille 1 kasse, skal man bestille 20 stk af denne vare.
https://unifi-hd.ubnt.com/
UBNT-UAP-AC-HD
UBNT-UNIFI
802.11AC Wave 2 MU-MIMO (Multi-User, Multiple Input, Multiple Output) technology allows a Wave 2 AP to communicate with multiple clients at the same time - significantly increasing multi-user throughput and overall user experience.
MU-MIMO Assuming the same conditions, a Wave 2 AP provides up to 75% improvement* overall over a Wave 1 AP. This improvement increases wireless performance and/or serves more clients at the same performance level.
4x4 Spatial Streams At any single time, a Wave 2 AP can communicate with the following MU-MIMO clients:
four 1x1 clients
two 2x2 clients
one 2x2 client and two 1x1 clients
one 3x3 client and one 1x1 client
A 4x4 Wave 2 AP delivers up to 33% greater performance than a Wave 1 AP that is 3x3 in both radio bands.
Real-World Performance The UniFi AC HD AP is the first UniFi 802.11AC Wave 2 AP. Combining the performance increases from MU-MIMO technology and the use of 4x4 spatial streams, the UniFi AC HD AP delivers up to 225% greater performance* than a typical Wave 1 AP.
Technical specification
Dimensions 220 x 220 x 48.1 mm (8.66 x 8.66 x 1.89)
Weight 700 g (1.54 lb)
Weight With Mounting Kits 830 g (1.83 lb)
Networking Interface (2) 10/100/1000 Ethernet Ports (Can be Aggregated)
Port (1) USB 3C Port
Buttons Reset
Power Method Passive Power over Ethernet (48V), 802.3at Supported
(Supported Voltage Range: 44 to 57VDC)
Power Supply 48V, 0.5A PoE Gigabit Adapter
Power Save Supported
Maximum Power Consumption 17W
TX Power 2.4 GHz: 6-25 dBm
5 GHz: 6-25 dBm
Antennas 2.4 GHz: (2) Antennas, 3 dBi each
5 GHz: (2) Antennas, 4 dBi each
Wi-Fi Standards 802.11 a/b/g/n/ac/ac-wave2
Wireless Security WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
802.11w/PMF
BSSID Up to Four per Radio
Mounting Wall/Ceiling (Kits Included)
Operating Temperature -10 to 70° C (14 to 158° F)
Operating Humidity 5 to 95% Noncondensing
Certifications CE, FCC, IC
Advanced Traffic Management
VLAN 802.1Q
Advanced QoS Per-User Rate Limiting
Guest Traffic Isolation Supported
WMM Voice, Video, Best Effort, and Background
Concurrent Clients 500+
Supported Data Rates (Mbps)
802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n 6.5 Mbps to 450 Mbps (MCS0 - MCS23, HT 20/40)
802.11ac 6.5 Mbps to 1.7 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80/160)
802.11b 1, 2, 5.5, 11 Mbps
802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps
Andre kunder så også
Recently viewed
Invalid password
Enter
